Konica Minolta CM-2600d, Instruction Manual

Page: 91 / 127

Type
Specular
component
Displayed value
Pass/fail
judgment
Display content
Box
tolerance
I+E
Color difference PASS Measured value, with “PASS” to the right
E* FAIL
Highlighted measured value, with highlighted
message to the right
Color difference PASS Measured value, with “PASS” to the right
E* FAIL
Highlighted measured value, with highlighted
“FAIL” to the right
SCI or SCE
Color difference
PASS Measured value, with “PASS” to the right.
FAIL
Highlighted measured value, with highlighted
“FAIL” and message to the right
E*
PASS Measured value, with “PASS” to the right
FAIL
Highlighted measured value, with highlighted
“FAIL” to the right
Elliptical
tolerance
I+E
SCI or SCE
Color difference No judgment Measured value, with message to the right
E*
PASS Measured value, with “PASS” to the right
FAIL
Measured value, with highlighted “FAIL” to the
right
E-89
Assessments
• The following deviation directions can be indicated by a message.
L*: LIGHTER/DARKER
a*: +RED (stronger red)/-RED (weaker red)/+GREEN (stronger green)/-GREEN (weaker green)
b*: +YELLOW (stronger yellow)/-YELLOW (weaker yellow)/BLUE (stronger blue)/-BLUE (weaker blue)
C*: DULLER/VIVID
H*: +RED (stronger red)/+YELLOW (stronger GREEN (stronger green)/+BLUE (stronger blue)
The pass/fail judgment made based on the specified elliptical tolerances will be displayed by “PASS” or “FAIL”
on the right of “ E*”.
N
ote
• If color difference tolerances have not been specified, pass/fail judgment result (“PASS” or “FAIL”) will not
be displayed.
• If no color target has been selected, the tint and brightness deviation direction and color difference will not be
displayed.
• No message may appear if the color difference is excessively small.