Konica Minolta CM-2600d, Instruction Manual

Page: 13 / 127

E-11
Accessories
Optional Accessories
Zero Calibration Box (CM-A32)
Used to perform zero calibration.
Hard Case (CM-A148)
Can be used for storing the CM-2600d/2500d, the instruction
manual and standard accessories, such as the White Calibration
Plate and AC adapter.
N
ote
The Hard Case is designed purely for storing the above items and
must not be used for transportation purposes.
Dust Cover Set (CM-A149)
Used when measuring powder or wet surfaces.
It can also be used when woven fabric needs to be laid flat and
measured.
M
emo
The Dust Cover (CM-A152) can be used as a vinyl cover for the re-
placement.
Color Data Software “ SpectraMagic NX ” (CM-S100w)
This software supports the two types of the target-mode,
“linked to each data.” and “defined in COND.”, provided by
this instrument. It allows you to operate the instrument from
your PC, and to process data and manage files.
Printer Cable (CR-A75)
*metric screw type
Used to transfer data to a printer. Connect a printer to the exter-
nal output terminal on the instrument with this cable. The D-
sub connector (9-pin) of the cable must be connected to the
printer.