E-57
Setting Color Difference Tolerances
4
Turn
B
to select “TOLERANCE”, then press
A
.
A screen that allows selection of the
tolerance type will appear.
If tolerances have already been set,
they will be displayed, so skip to
step 6.
5
Turn
B
to select “ELLIPTICAL”, then press
A
.
6
Turn
B
to select “ADJUST”, then press
A
.
7
Select the value for an item to be set, starting from the top, then press
A
.
The selected value will be set,
and the cursor will move to the
next value.
M
emo
Keeping
A
held down will
cause the cursor to move from one
value to another continuously. The
cursor will stop when it reaches
“ADJUST”.
<Settings>
•
(Tolerance range):
0.1 to 20.0
The tolerance range for “MINOR” must be smaller than that for “MAJOR”.
• OFFS.:
Below the spe/- tolerances
• ROTAT.:
0.0 to 179.9
Summary of Contents for CM-2600d
