2-16
)
Scan measurement adjustment (When using PF-708 Scanner)
Adjust the magnification ratio and printing position of the back side with reference to the printing position of the front
side. The magnification ratio and printing position of the back side are automatically adjusted by using the scanner
function of this machine to measure the gap amount in printing position of the back side to the front side. You do not
need to measure the gap amount with a scale. The adjustment is available for paper of all sizes which can be used
with this machine.
Print out 1 to 20 sheets of the adjustment chart having both front and back sides printed, and scan them 4 times per
sheet. The average value of gap amounts in printing position of the back side to the front side, which can be obtained
by scanning up to 20 sheets of the adjustment chart, will be calculated in order to adjust the magnification ratio and
printing position of the back side.
NOTICE
The [Scan Meas.] adjustment provides the coordination based on the average value of gap amounts, taking into
account the gap in printing position between the first and last sheets which can be produced when multiple sheets are
output.
Performing the [Scan Meas.] adjustment may require readjustment of the "Zoom and Image Shift Adjustment"
registered in a paper profile.
The [Scan Meas.] adjustment is a simple method to adjust only the magnification ratio and image position of the back
side. To adjust both front and back sides, perform the "Front side Adjustment" (
Page 2-6
).
1
Press [Paper Setting] on the [MACHINE]
screen.
2
Select the tray with the target paper
loaded, then press [Change Set].
Summary of Contents for bizhub PRESS C1085
