manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 86 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 86

3

Scanning Documents

3-46

bizhub 500/420 (Phase 2)

3

Enter the destination information.

–

Host Name: Specify the destination host name (enter using capital 
letters) or the IP address. Type in the destination name using the 
keyboard, and then touch [OK].

–

Destination Folder: Enter the path to the destination folder using 
capital letters.

–

User Name: Use the keyboard that appears in the touch panel to 
specify the login user name, and then touch [OK].

–

Password: Use the keyboard that appears in the touch panel to 
specify the password, and then touch [OK].

–

To specify an additional address, touch [Next Dest.], and then 
specify the address.

–

To check the contents of the shared folders, touch [Reference].

4

Touch [OK].

The specified addresses are listed under "Broadcast Destinations".

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments