manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 163 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 163

Specifying Settings From the Control Panel

4

bizhub 500/420 (Phase 2)

4-27

4.5

Registering Program Destinations

Program destinations can be registered. Only one destination can be 
registered in a program. Up to 400 destinations can be registered in program 
destinations, including fax program destinations. (If the optional hard disk 
drive is not installed, up to 200 destinations can be registered.)

To register a program destination

1

In the Scan screen, touch [3 Program]. (Refer to "To display the Scan 
screen" on page 4-6 for more details.)

2

Touch the button for the desired program number.

3

Touch [Edit].

The Program Setting screen appears.

4

Touch [Name] and type in the name using the keyboard that appears 
on the screen.

5

Touch [OK].

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments