manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 149 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 149

Specifying Settings From the Control Panel

4

bizhub 500/420 (Phase 2)

4-13

5

Touch [OK].

6

Touch [E-Mail Address] and type in the e-mail address using the 
keyboard that appears on the screen.

7

Touch [OK].

8

Touch [Index] and touch the desired button.

–

This specifies the characters used to index the destination.

–

For destinations that are often used, specify [Main] at the same 
time, and it will be easier to search.

–

If the first character of the name is a letter, the first character is 
automatically registered as the indexing character.

–

The registration cannot be completed unless settings have been 
specified for "Name" and "E-Mail Address".

9

Touch [OK], and then touch [OK] in the next screen that appears.

The e-mail destination is registered.

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments