manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 148 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 148

4

Specifying Settings From the Control Panel

4-12

bizhub 500/420 (Phase 2)

4.3

Registering Abbreviated Destinations

Abbreviated destinations can be specified. Up to 2000 destinations can be 
registered when the optional hard disk drive is installed, and up to 1000 
destinations can be registered if the optional hard disk drive is not installed.

E-Mail Destinations

E-mail addresses can be registered.

1

In the Scan screen, touch [1 Address Book]. (Refer to "To display the 
Scan screen" on page 4-6 for more details.)

2

Touch [1 E-Mail].

The E-Mail screen appears.

3

Touch [New].

The Register E-Mail Address screen appears.

4

Touch [Name] and type in the name using the keyboard that appears 
on the screen.

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments