manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 166 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 166

4

Specifying Settings From the Control Panel

4-30

bizhub 500/420 (Phase 2)

4.6

Specifying E-Mail Settings

Up to 10 e-mail subjects and text can be registered.

Subject

E-Mail subjects can be registered.

1

In the Scan screen, touch [4 Subject/Text (for E-mail)]. (Refer to "To 
display the Scan screen" on page 4-6 for more details.)

2

Touch [1 Subject].

The E-Mail Title screen appears.

3

Touch [New].

The E-Mail Subject Registration screen appears.

4

Touch [Subject] and type in the subject using the keyboard that 
appears on the screen.

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments