Konica Minolta BIZHUB 420 User Manual Download Page 444

Page: 444 / 454

Appendix

7-8

bizhub 500/420 (Phase 2)

To type text

Touch the button for the desired character from the keyboard that
appeared.
–

To type in uppercase letters or symbols, touch [Shift].

–

Numbers can also be typed in with the keypad.

The entered characters appear in the text box.

Note

To cancel changes to the settings, touch [Cancel].

To clear all entered text, press the [C] (clear) key.

Detail

To change a character in the entered text, touch [

] and [

] to move

the cursor to the character to be changed, touch [Delete], and then type
in the desired letter or number.

List of Available Characters

Type

Characters

Alphanumeric
characters / symbols

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Search results

Summary of Contents for BIZHUB 420

Reviews:

Konica Minolta BIZHUB 420, User Manual, Page: 444 / 454

Search results

Summary of Contents for BIZHUB 420

Reviews: