manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 161 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 161

Specifying Settings From the Control Panel

4

bizhub 500/420 (Phase 2)

4-25

4.4

Registering Group Destinations

Group destinations can be registered.

Up to 100 groups can be registered. Up to 500 destinations can be 
registered to one group.

To register a group destination

1

In the Scan screen, touch [2 Group]. (Refer to "To display the Scan 
screen" on page 4-6 for more details.)

The Group screen appears.

2

Touch [New].

The Register Group screen appears.

3

Touch [Name] and type in the name using the keyboard that appears 
on the screen.

4

Touch [OK].

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments