manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 274 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 274

4

Specifying Settings From the Control Panel

4-138

bizhub 500/420 (Phase 2)

4.30

Prefix/Suffix Settings

The registered characters can be added to the e-mail address that is 
specified when sending e-mail. This eliminates having to enter characters 
that are often entered such as the same domain name.

Prefix/Suffix Parameters

The prefix/suffix parameters are as follows:

Item

Description

ON/OFF Setting

This parameter sets whether to enable the prefix/suffix 
function.

Prefix/Suffix Setting

Registers the character strings that are used by the pre-
fix/suffix function. For details on specifying the settings, re-
fer to "Prefix/Suffix Settings" on page 4-138.

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments