manualshive.com logo in svg

Konica Minolta BIZHUB 420, User Manual, Page: 36 / 454

Share
Download
Konica Minolta BIZHUB 420 User Manual Download Page 36

2

Before Using the Scan Functions

2-12

bizhub 500/420 (Phase 2)

Specifying Program Settings

The destination and scan settings can be registered together as a single 
program. This is convenient for frequently scanning documents and sending 
data under the same conditions.

These settings are specified from the touch panel of the machine.

!

Detail 

For details, refer to "Registering Program Destinations" on page 4-27.

Specifying Default Scan Settings

The settings that are selected when [Scan] in the control panel is touched 
can be specified.

!

Detail 

For details, refer to "Setting the Save Format of the Data to Be Scanned" 
on page 4-40.

Summary of Contents for BIZHUB 420







































































































































































































































































































































































































































































Reviews:

No comments