Konica Minolta bizhub 360, User Manual

Page: 83 / 692

Before Making Copies 2
bizhub 360 2-31
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
!
Detail
Default settings are those settings that have not been changed since the
power is turned on, or that are available after pressing [Reset] to reset all
the previously specified settings.
The default settings can be changed. For details, refer to page 14-27.
The factory default settings are the settings that were set when this ma-
chine was shipped from the factory.
Turning off the machine
0
The main power is normally to be kept turned on. Turning it off will termi-
nate all the functions including printing, and receiving and outputting fac-
simile data.
0
Do not turn off the main power while queued jobs or stored jobs are still
pending to be printed.Otherwise, data that are yet to be printed out will
be deleted.
0
Do not turn off the main power or sub power while printing is in
progress.Otherwise it will cause paper misfeeds.
0
Do not turn off the main power or sub power while scanning originals or
transmitting image data.Otherwise, data whose handling has yet to be
completed will be deleted.
1
Turn off the sub power.
– The sub power
switch is located on
the right side surface
of the control panel.
– Press the sub power
switch to turn it off.
The display on the touch panel goes off, and all the lights are turned off
except for the main power indicator.