Konica Minolta bizhub 360, User Manual

Page: 348 / 692

6 Finishing/Folding
6-12 bizhub 360
Finishing/Folding
Ch
apt
er
6
To copy using Staple mode
0
If Staple is to be selected, select the orientation in which the original is
positioned and the orientation of the page to be stapled, otherwise the
copies may not be stapled as desired.
0
If Staple is selected, the machine also selects Sort automatically with dis-
abling Group and Offset. Each copied set is supposed to be sorted and
stapled.
0
If staple position setting is different from the binding position specified in
Page Margin of Application setting, the staple position is given priority.
0
With Auto selected on the Staple Position popup menu, the staple posi-
tion will be determined automatically to the longer side for 8-1/2 × 11
copy paper, or to the shorter side for copy paper larger than 8-1/2 × 11.
0
Available paper weight is 16 to 24 lb. For details of other specifications,
see page 9-3.
0
Using excessively curled paper or some types of thin paper in Staple
mode may cause poor results in arrangement of the stapled sets.
0
Each output tray of Finisher FS-510 and FS-511 has a limit in capacity.
Be careful not to exceed the limit. For details, see “Paper Tray/ Output
Tray Capacity” on page 9-4.
1
Position the original to be copied.
2
Using the keypad, enter the desired number of copies.
3
Touch [Combine Originals] tab on the Basic Screen, then make Original
Direction and Margin settings.
– For setting Original Direction, see “Specifying Orientation of Origi-
nal (Original Direction)” on page 4-12.
For setting Margin, see “Paper Tray/ Output Tray Capacity” on
page 9-4.
– When completed, touch [Basic] tab to return to the Basic Screen.