Konica Minolta bizhub 360, User Manual

Page: 266 / 692

5 Application Functions
5-50 bizhub 360
Applicat
io
n Fun
c
ti
on
s
Ch
apt
er
5
5.8.2 Specifying Repeat Times (2/4/8 Repeat)
Use this function to specify the number of repeats from 2, 4, and 8 times, ir-
respective of the original image size.
To specify number of repeats
0
Position the original on the original glass or in the ADF.
0
Use Set Range mode to repeat a part of the original, not the entire image,
by specifying the scanning area.
Select the standard size or enter the dimensions of custom size.
Available dimensions: 2 to 17 in. for side X, 2 to 11-11/16 in. for side Y
0
Select With Margin to repeat the image within the printing area leaving 3
mm from the leading edge, 4 mm from the rear edge, and 2 mm each
from left and right edges of selected paper size.
When Without Margin is selected, the original image will be repeated to
the margin area in which an image loss is likely.
0
With 2 Repeat selected, the interval between the two copy images can
be adjusted by Repeat Interval Setting.
0
Tray 1 will be automatically selected as copy paper tray source.
Change the tray selection manually, if desired. Auto Paper Select will not
function.
0
Auto Zoom will not function. Specify the desired magnification ratio.
1
Position the original.
2
Enter the desired print quantity from the control panel keypad.
3
Load the desired copy paper into any tray.
4
Specify the paper tray on the Paper Screen.
– Touch [Paper] on the Basic Screen to display the Paper Screen.
– Touch the desired tray key to highlight it. Without this tray selection,
the machine will automatically use copy paper loaded in tray 1 to
print.