Konica Minolta bizhub 360, User Manual

Page: 583 / 692

Utility <Administrator Setting> 15
bizhub 360 15-37
U
tility <Administr
ator Setting>
Chap
te
r 1
5
15.2.6 Weekly Timer Setting Outlines
The Weekly Timer is a function accessed only by the administrator that man-
ages the machine as follows.
-
Specify the timer working day individually or weekly in Date Setting.
-
Specify the time to turn on/off the machine individually for each day of the
week in Time Setting.
-
Basically turn on and off the machine once a day. However, power saving
time can also be programmed once a day while the machine is powered
by Weekly Timer function.
-
A specific password can be set by the administrator and then used when
[Power Save] on the control panel is pressed, in order to allow temporary
use of the machine while power is shut down by Weekly Timer function.
The Weekly Timer is disabled as factory default.
Conditions required to use the Weekly Timer
-
The power plug is inserted into the wall socket.
If the machine is unplugged, the Weekly Timer will not function while the
setting data such as on/off time will be kept stored.
-
The main power switch and sub power switch are turned on.
-
The current date and time are correctly set.