Konica Minolta bizhub 360, User Manual

Page: 358 / 692

6 Finishing/Folding
6-22 bizhub 360
Finishing/Folding
Ch
apt
er
6
6.6 Output for Machine with Separator
The machine with Separator
installed can deliver the print-
ed sheets separately into dif-
ferent trays.
The following four output
modes are available for use
with two output trays. As fac-
tory default, copies will be de-
livered into the tray 2 in Group
mode.
-
Sort
Select this setting to separate each set of a multi-page original.
-
Group
Select this setting to separate the copies of each page in a multi-page
original.
-
Sort + Offset
Select this setting to rotate every other set by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in
crosswise orientation
v
and the other tray with paper loaded in length-
wise orientation
w
, e.g., 8-1/2 × 11- or 5-1/2 × 8-1/2 size paper.
-
Group + Offset
Select this setting to rotate every other grouped set by 90° upon exit, pro-
vided the same paper size is loaded in two trays, one tray with paper
loaded in crosswise orientation
v
and the other tray with paper loaded in
lengthwise orientation
w
, e.g., 8-1/2 × 11- or 5-1/2 × 8-1/2 size paper.
Specifying a tray for the output to be made in other job type than Copy (e.g.
Print, Reports, or Fax), printed sheets will be distributed into the specified
tray in order to prevent the output sheets from being mixed up.
2
Note
The output tray can be specified for each job type (Copy, Print, and Re-
ports). See page 15-29 for details.
To specify Separator output mode
0
As the default setting, Sort is selected. No limit is established in Sort
mode.