Konica Minolta bizhub 360, User Manual

Page: 105 / 692

Before Making Copies 2
bizhub 360 2-53
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
2
Reminder
If the lateral guides are not positioned correctly for the loaded paper, the
paper size will not be detected successfully. Be sure to adjust the lateral
guides to the size of the loaded paper.
Make sure to align the trailing-edge guide exactly with the paper.If there
is space between the trailing-edge guide and the paper, the paper will not
be fed correctly.
Do not load so much paper that the top of the stack does not exceed the
paper capacity (
,
) mark.
Flatten the paper before loading it to prevent any trouble.
Do not touch the film located at the right-hand end of the tray.If it is ac-
cidentally bent or folded, this will cause paper to be fed incorrectly.
To load paper in tray 3
Follow the procedure described below to load paper into tray 3 (optional pa-
per feed cabinet PC-402).
0
A paper cabinet can be loaded with up to 2,500 sheets (20 lb paper) of 8-
1/2 × 11-sized paper only.
0
The paper feed cabinet can be pulled out only when both the main power
and the sub power are turned on. Make sure that both powers are turned
on when loading paper into the paper feed cabinet.
0
The paper feed cabinet cannot be pulled out when the machine is in the
sleep mode. Make sure to interrupt the sleep mode when loading paper
into the paper feed cabinet.
1
Press the cabinet lock release button.
The cabinet becomes unlocked and is pushed out slightly to the fore.