Konica Minolta bizhub 360, User Manual

Page: 15 / 692

Introduction
bizhub 360 x-13
9.2 Originals .......................................................................................... 9-13
Unsuitable ADF Originals ............................................................. 9-13
Positioning Original into the ADF ................................................. 9-14
Positioning Original on the Original Glass .................................... 9-15
10 Supplies & Handling
10.1 When the Message “Replenish Paper” Is Displayed ................... 10-2
10.2 Replacing Toner Cartridge ............................................................ 10-3
Display in Enlarge Display Mode ................................................. 10-4
To replace the toner cartridge ...................................................... 10-5
10.3 Adding Staples ................................................................................ 10-9
Display in Enlarge Display Mode ............................................... 10-10
To replace the staple cartridge for Finisher FS-511 .................. 10-10
To replace the staple cartridge for Finisher FS-510 .................. 10-14
To replace the staple cartridge for Saddle stitcher SD-502 ...... 10-18
10.4 Emptying Dust Boxes ................................................................... 10-22
To empty the dust box of FS-511 .............................................. 10-22
To empty the dust box of PU-501 ............................................. 10-24
11 Troubleshooting
11.1 When the Message “Malfunction Detected” Appears (Call Technical
Representative) ............................................................................... 11-2
Display in Enlarge Display Mode ................................................. 11-2
To call the technical representative ............................................. 11-3
11.2 When the Message “Misfeed Detected” Is Displayed ................. 11-5
To clear a paper misfeed ............................................................. 11-6
11.3 When the Message “...Not Enough Remaining Memory” Is Displayed
11-8
Memory Becomes Full While Scanning ....................................... 11-8
Memory Becomes Full While Queuing a Job ............................... 11-9
11.4 Simple Troubleshooting ............................................................... 11-10
11.5 Main Messages and Their Remedies .......................................... 11-13
12 Machine Maintenance
12.1 Cleaning ........................................................................................... 12-2
Cleaning the left partition glass .................................................... 12-2
Cleaning the original glass ........................................................... 12-2
Cleaning the document pad ......................................................... 12-3
Cleaning the paper take-up roller ................................................ 12-3
Cleaning the writing unit glass and the electrode wires .............. 12-4
Cleaning the main unit ................................................................. 12-4