User's Guide
- 91 -
Print Settings
Setup menu
Use
To
Printer Language
PCL Emulation
PS Emulation
Set the default printer language.
Notes:
•
PCL Emulation is the factory default setting.
•
PCL Emulation uses a PCL interpreter for processing print
jobs.
•
PS Emulation uses a PostScript interpreter for processing
print jobs.
•
Setting a printer language default does not prevent a
software program from sending print jobs that use another
printer language.
Print Area
Normal
Whole Page
Set the logical and physical printable area.
Notes:
•
Normal is the factory default setting. Normal allows the
printer to use the PCL- and PostScript-defined printable
regions and logical page sizes.
•
Whole Page allows the image to be moved outside the
Normal-defined logical page area. However, if the user
prints any data in the non-printable area, then the printer
clips the image at the boundary defined by the Normal
setting. This setting affects only pages printed using a
PCL 5 interpreter and has no effect on pages printed
using the PCL XL or PostScript interpreter.
Resource Save
On
Off
Specify how the printer handles temporary downloads, such as
fonts and macros stored in the RAM, when the printer receives
a print job that requires more than the available memory.
Notes:
•
Off is the factory default setting. Off sets the printer to
retain downloads only until memory is needed. Downloads
are deleted in order to process print jobs.
•
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then the
Memory Full [38]
error message
appears, but downloads are not deleted.
