User's Guide
- 22 -
3—Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD:
If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
Warning—Potential Damage:
Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board electronic
components or connectors.
Available internal options
•
Flash memory
- Fonts
- Firmware
Accessing the controller board
Access the controller board to install internal options.
See
Accessing the controller board
.
