User's Guide
- 88 -
Use
To
Timeouts
Hibernate Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Set the amount of time the printer waits after a job is printed
before it enters Hibernate mode.
Notes:
•
Disabled is the factory default setting in all countries
except European Union countries and Switzerland.
•
3 days is the factory default setting for all European Union
countries and Switzerland.
•
The setting is also disabled if the printer detects an active
Ethernet connection, regardless of country. However, to
enable the setting even with an active Ethernet
connection, click
Settings
>
General Settings
>
Hibernate
Timeout on Connection
>
Hibernate
.
To wake the printer from Hibernate mode, try one of the
following:
•
Press the Sleep button for less than three seconds if
Press Sleep Button is set to Hibernate.
•
Press and hold the Sleep button for more than three
seconds if Press and Hold Sleep Button is set to
Hibernate.
•
Turn off the printer, and then turn it back on.
Timeouts
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Set the printer to Hibernate mode even if there is an active
Ethernet connection.
Note:
Do Not Hibernate is the factory default setting.
Timeouts
Print Timeout
Disabled
1–255 sec
Set the amount of time in seconds the printer waits to receive
an end-of-job message before canceling the remainder of the
print job.
Notes:
•
“90 sec” is the factory default setting.
•
When the timer expires, any partially printed page still in
the printer is printed, and then the printer checks to see if
any new print jobs are waiting.
•
Print Timeout is available only when using PCL emulation.
This setting has no effect on PostScript emulation print
jobs.
