Kongskilde GXS 9005, Operator'S Manual

Page: 22 / 70

2. CONNECTION AND TEST DRIVING
PIGB-183X 04 GXS 9005 / P 0218
22
HYDRAULIC CONNECTIONS
The GXS 9005 (P) hydraulic system can be operated with either two or just one
single-acting outlet.
If only one outlet is used the cutting units are lifted at the same time and they cannot
be lifted separately. If two outlets are used the cutting units can be lifted separately.
Both outlets must be activated to lift both cutting units at the same time.
Fig. 2.3 Two outlets
Recommended:
If you want to use two outlets you should close the ball valve in the middle so that the
hydraulics works separately for the two sides. Both hoses are connected to two
different outlets on the tractor and ball valves for both are opened.
Fig. 2.4 One outlet
If you only want to use one outlet you should open the ball valve in the middle so that
the hydraulics works for both sides. One of the hoses is connected to the outlet on
the tractor. The other hose must not be used and the ball valve for this other hose is
to be closed.
Fig. 2.3
Fig. 2.4