5. MAINTENANCE
PIGB-183X 04 GXS 9005 / P 0218
51
FRICTION CLUTCH
The front PTO drive shaft has a friction clutch.
Fig. 5.2
The figure illustrates how the clutch protects the transmission against high torque
peaks and at the same time is capable of transmitting the torque while it is in function
(slips).
The friction clutch must be maintained at regular intervals. At the same time the
clutch must be checked after any long period of standstill. This especially applies
after winter storage before the machine is used for the first time in the season.
Maintaining the friction clutch:
Fig. 5.3
1) The nuts
3
are tightened equally whereby the friction discs are relieved.
2) Turn the clutch all the way round.
3) The nuts
4
are turned back to the end of the thread.
P
R
1
1
-1
6
8
1
4
3
Fig. 5.3
Fig. 5.2
Summary of Contents for GXS 9005
Page 2: ......
Page 16: ...1 INTRODUCTION PIGB 183X 04 GXS 9005 P 0218 16 ...
Page 18: ...1 INTRODUCTION PIGB 183X 04 GXS 9005 P 0218 18 PR11 1695 H B X L ...
Page 69: ......
