1. INTRODUCTION
PIGB-183X 04 GXS 9005 / P 0218
17
SAFETY DECALS
The safety decals shown on the previous page are positioned as shown on the
drawings at the bottom of the page. Before using the machine, check that all decals
are present: if not, require those missing. The decals have the following meaning:
1.
Read the instruction manual and the safety instructions.
This is to remind you to read the delivered documents to ensure the machine is operated
correctly and to avoid unnecessary accidents and machine damage.
2.
Stop the tractor engine and remove the ignition key before touching the machine.
Always remember to stop the tractor engine before lubricating, adjusting, maintaining or
repairing. Also remember to remove the ignition key to ensure that nobody starts the engine.
3.
Risk of stones being thrown.
Even though all canvases and guards are in the right place, there is still a risk of stones etc.
being thrown out. Therefore, nobody should be allowed to stand near the machine during
operation.
4.
Rotating parts.
After the PTO drive shaft has stopped, the blades will have a momentum where they keep
rotating for up to 2 minutes. Wait until the blades have come to a complete stop before you
remove the canvas and the guards for inspection and maintenance.
5.
Operation without canvas.
Do not start the machine unless canvases and guards are intact and in their right place. The
machine can throw out stones and other foreign matter during operation. The purpose of the
canvases and the guards is to reduce such danger.
6.
Children.
Never let children stand near the machine during operation. Especially not small children as
they have a tendency to do unforeseen things.
7.
Rotating blades.
Do not under any circumstances let anyone get near or stand near the machine during
operation. The rotating blades of the machine can without difficulty cause serious injury to
any part of the body if hit by such a blade.
8.
Stones being thrown from the conditioner.
The conditioner rotor runs with a high number of RPM and stones on the ground can be
thrown up to 10 m backwards at a very high speed. Therefore, always make sure that
nobody is standing near the machine when it is working.
9.
Risk of injury during the connection
Never let anybody stand between the tractor and the machine during connection to the
tractor. An unintentional manoeuvre may cause serious injury.
10.
The number and the direction of rotations.
Check that the PTO drive shaft runs with the right RPM and in the right direction. A wrong
number of rotations and/or direction of rotation can damage the machine with the risk of
personal injury as a result.
11.
Stop PTO
PTO must be stopped before the machine is swivelled into transport position.
Summary of Contents for GXS 9005
Page 2: ......
Page 16: ...1 INTRODUCTION PIGB 183X 04 GXS 9005 P 0218 16 ...
Page 18: ...1 INTRODUCTION PIGB 183X 04 GXS 9005 P 0218 18 PR11 1695 H B X L ...
Page 69: ......
