Kongskilde GXS 9005, Operator'S Manual

Page: 33 / 70

3. DRIVING AND OPERATION
PIGB-183X 04 GXS 9005 / P 0218
33
TRANSPORT POSITION
IMPORTANT:
The following instructions imply that the machine has been prepared,
adjusted to the tractor and tested according to section 2.
CONNECTION AND TEST DRIVING.
Disconnection of the machine is also described in section 2.
DANGER: TRAFFIC MARKING: Before transporting the machine on public road,
make sure that the traffic rules can be observed. This, of course,
implies that the machine does not cover the lights and signals on the
tractor.
VERTICAL TRANSPORT POSITION
Before transport the GXS 9005 (P) is placed in vertical transport position.
Fig. 3.2 Folding to vertical transport position takes place hydraulically with the lifting cylinder
by activating the tractor’s hydraulic outlet. Between the tractor and the cylinder there
is a valve which
limits the lifting height to the headland position “Easy Lift”. By pulling
the cord for the transport safety device, the valve is oversteered so that the machine
can be lifted higher.
DANGER: Before the machine is folded to transport position, you must
check that there are no persons in the danger zone and that
there is no risk of collision with objects near the machine.
Fig. 3.2