Kongsberg Simrad EK80, Installation Manual

Page: 211 / 354

394149/D
209
3 Lift the front end of the transducer up, so that the indicator arrow moves
up. This is a
Rotation around Y
.
4 Proceed until the requested angle has been reached.
Example : If a 30-degree Y angle is requested, the
Rotation around Y
must
be set to 60 degrees (that is the angle from the default position). Since
the transducer is pointing straight forward, the
Rotation around Z
value
is 0 (zero).
5 From this raised position, turn the transducer towards starboard. The
indicator arrow is still pointing up. This is a
Rotation around Z
.
6 Proceed until the requested angle has been reached.
Example : If a 90-degree Z angle is requested, the
Rotation around Z
must
be set to 90 degrees (that is the angle from the forward position).
11 Select
Add
to save the information you have provided.
The transducer is added to the list in the
Installed Transducers
box.
12 Repeat for each transducer that you wish to install.
13 Continue your work in the
Installation
dialog box, or select
OK
to close it.
Result
Once a transducer has been installed, it is listed in the
Installed Transducers
box. To see
the information you have collected about the transducer, select the relevant transducer
in the list.
The
Edit
functionality on the
Transducer Installation
page makes it possible to change
the information you have provided for the transducer. You cannot change the model
identification and the serial number. The custom name is used several places in the user
interface, and it can be changed.
The
Remove
functionality on the
Transducer Installation
page makes it possible to delete
the information you have provided for the transducer. There is no "undo" functionality.
Related topics
Turning on the EK80 for the first time, page 199
Setting to work, page 185
Setting to work