Kongsberg Flexview, Installation Manual

Page: 92 / 126

90
922-20207011/1.0
An average link speed of at least 80 Mbps is required by most sonar applications
(some applications and range scales will use less). A link speed of less than 80
Mbps may result in a slower than expected ping rate.
c Right-click in the Throughput graph and select
View network details
.
Observe that the
Network Details
window opens.
d Confirm that the Network utilization is at least 80%.
Note
If the Network utilization is less than 80%, disconnect the sonar, close all other
programs, then reconnect the sonar. In general, make sure that your network
environment supports the required link speed.
e In the Flexview software, look for any messages in the
Output Messages
window.
Make sure there are no lost packets.
Tip
The contents of the
Output Messages
window are also saved to a file in the folder
C:\KML\Flexview_V0100\LOGS.
f If you see missing pings, try reduce the value in the
Override Network Link Speed
box to improve the performance.
Flexview Installation Manual