Kongsberg Flexview, Installation Manual

Page: 29 / 126

922-20207011/1.0
27
Attaching the Sonar Head to a bracket
The Sonar Head is designed to attach to a mounting bracket.
Prerequisites
• To install the Flexview, you must have basic mechanical skills. We recommend two
people do the installation together.
• We assume that you are equipped with a standard set of tools. This tool set must comprise
the normal tools for mechanical tasks. This includes different screwdriver types, pliers,
adjustable spanners, etc. Depending on the chosen installation method, additional tools
may be required.
• You will need a mounting bracket that attaches to the Flexview. The type of mounting
bracket you need depends on how you intend to deploy the sonar.
• You will need to install the four plastic shoulder washers and plastic isolation pad found
in your Sonar Head accessory kit. These parts are used to protect the Sonar Head from
corrosion.
Context
The following illustration is provided as an example. When attaching the Flexview to a
bracket, the most important task is to make sure there is no electrical connection between
the Sonar Head and the bracket.
Installing the Sonar Head