Kongsberg Flexview, Installation Manual

Page: 119 / 126

922-20207011/1.0
117
Repacking the Sonar Head
The Sonar Head comes in a hard-shell case.
Prerequisites
• All units and parts must be rinsed with fresh water and dried off before packing away.
• All cables must be disconnected and protective dust caps placed on all connectors.
Caution
The Sonar Head’s black polyurethane transducer is delicate. Avoid impacts to the
transducer when installing or handling the Flexview.
Prolonged exposure to ultra-violet rays and excessive heat may damage the surface of
the polyurethane transducer face. Always store the Flexview in the provided equipment
case when not in use. Store the Sonar Head in a cool, dry location away from ozone
sources (such as electric motors or welders). If the Flexview is mounted on an ROV, cover
the transducer when not in use.
Equipment handling