Kongsberg Flexview, Installation Manual

Page: 69 / 126

922-20207011/1.0
67
Ethernet cable
Most high speed connections are made using Ethernet cables. The Flexview must use T568B
termination for RJ45 connections on both ends of the cable.
A Local Ethernet connection
B Connection on external network
device
Ethernet cables are available
commercially in different lengths,
colours and categories. Normally,
CAT-5E and CAT-6 cables are used
in local area networks with bandwidths
exceeding 100 Mbit.
Note
It is very important that high-quality Ethernet cables are used. You must use CAT-5E quality
or better. If you use cables with lower bandwidth capacity you will reduce the Flexview
performance.
For 100Base-TX connections only Orange, Orange-White, Green, and Green-White are
required. No cross-over is required for 100Base-TX direct pier to pier connections with
the Flexview.
Minimum cable requirements
Not applicable. This is a commercial cable.
Cable layout and interconnections