Komatsu PC16R-3, Operation & Maintenance Manual

Page: 94 / 288

INSTRUMENTS AND CONTROLS
92
2. - 3. Work equipment control levers
NOTE
q
For the details of proportional control switch see "6.5 PREPA-
RATION FOR EQUIPMENT INSTALLATION (only for machines
with proportional controls)".
WARNING
q
Before carrying out any manoeuvre with these levers, the
operator must seat in the work position and fasten the seat
belt.
q
Before leaving the driver seat, lower the equipment to the
ground, lock the controls with the safety lever and stop the
engine.
IMPORTANT
q
The horn push button is positioned on the right lever grip
and must be used to warn all the people in the vicinity be-
fore starting work and in case of danger.
q
When the safety lever is in the “locked” position, all the
movements are inhibited (see "3.2.3 pos: 1. Safety lever
(control locking lever)").
The control lever (2) is positioned on the operator’s left and con-
trols the arm and the turret swing.
q
Swing function

(a) Swing to the right

(b) Swing to the left
q
Arm

(c) Fold

(d) Extend
N (Neutral): the turret and the arm are held in the position where
they stopped.
RKA22550
RKA01440 RKA01440
RKA16230
WEAM012405