Komatsu PC16R-3, Operation & Maintenance Manual

Page: 202 / 288

FUEL, COOLANT AND LUBRICANTS
200
4.4.2 APPROVED SYNTHETIC BIODEGRADABLE LUBRICANTS TYPE
HEES
Our machines can be filled with synthetic biodegradable hydraulic oil type HEES not of plant origin and therefore
the use of the oils indicated in the following table is authorized and recommended:
CAUTION
q
It is not possible to mix the synthetic biodegradable oil type HEES with ordinary hydraulic oils, since
when the temperature increases insoluble compounds are generated, which deposit on the filters and
clog them (the maximum concentration of ordinary oil must not exceed 1% of the total quantity of oil).
q
Biodegradable oil can be used only in the hydraulic system; it cannot be used for the engine, the trans-
missions, the braking system, etc.
q
Before introducing biodegradable oil in the hydraulic system, drain the system completely, disconnect-
ing the cylinders and all the parts that may contain traditional oil, then change the drain filter with a new
one. Start the engine and let it idle before using the equipment, wait for the engine temperature to reach
at least 40°C, then start moving the equipment to fill all the circuits with oil. Stop the engine and check
the oil level (see "3.3.1.2 CHECKS TO BE CARRIED OUT BEFORE STARTING THE ENGINE" - " CHECK-
ING THE OIL LEVEL IN THE HYDRAULIC TANK AND TOPPING UP").
SUPPLIER SYNTHETIC BIODEGRADABLE OIL TYPE “HEES”
KOMATSU BO 46 G4 (KES 07.872)
AGIP —
ARAL —
AVIA —
BP —
CONDAT CONDAT D 46 K
ELF —
ESSO —
FINA BIOHYDRAN SE 46
FUCHS —
KENDALL —
KUWAIT PETROLEUM K8 —
MOBIL EAL SYNDRAULIC
MOBIL (USA) —
PAKELO —
PANOLIN HLP SYNTH 46
SHELL —
TAMOIL —
TEXACO —
TOTAL HYDROBIO 46
VALVOLINE —
WEAM012405