Komatsu PC16R-3, Operation & Maintenance Manual

Page: 169 / 288

TRANSPORTING THE MACHINE
167
4. Shift the safety lever to the “locked” position (L).
5. Lock the sliding door (machines with cab) and the covers
with lock, see paragraph.

See paragraph "3.2.5 COVERSWITH LOCK".
IMPORTANT
q
Do not use the hole in the back of the undercarriage to tow
or lift the machine.
6. Place blocks under both ends of the tracks to prevent the
machine from moving during transport and secure the
machine with sufficiently strong chains or metal cables.Pay
special attention when securing the machine, to prevent it
from sliding laterally.

When securing the machine with a chain or metal cable, use
the hole in the rear part of the undercarriage and the hole in
the blade side plate.
Method of securing the machine with Tie Down
1. Lower the blade.
2. Extend the bucket cylinder and the arm cylinder completely,
and lower the boom slowly.
3. Stop the engine and remove the ignition key.
4. Shift the safety lever to the “locked” position (L).
5. Lock the sliding door (machines with cab) and the covers
with lock, see paragraph.

See paragraph "3.2.5 COVERSWITH LOCK".
IMPORTANT
q
Do not use the hole in the back of the undercarriage to tow
or lift the machine.
RKA23010
RKA23010
WEAM012405