Komatsu Utility 76243, Operation & Maintenance Manual

Page: 66 / 302

EXPLANATION OF COMPONENTS
OPERATION
3-6
B: Caution monitor group (see “CAUTION MONITOR GROUP (3-9)“)
CAUTION
If the caution lamp for any of these items flashes, check and repair the appropriate item as soon as possi-
ble.
These are items, which need to be observed while the engine is running. If any abnormality occurs, items, which
need to be repaired as soon as possible, are displayed.
If there is any abnormality, the appropriate monitor lamp will flash to indicate the location of the abnormality.
C: Emergency caution items (see “EMERGENCY CAUTION ITEMS (3-11)“)
CAUTION
If the caution lamp for any of these items flashes, stop the engine immediately or run it at low idling, and
take the following action.
This displays the abnormal items that action must be taken on immediately the engine is running.
If there is any abnormality, the monitor showing the location of the abnormality will flash and the alarm buzzer will
sound.
D: Meter group (see “METER GROUP (3-14)“)
This consists of the preheating pilot lamp, power train oil temperature gauge, engine water temperature gauge,
hydraulic oil temperature gauge, fuel gauge, display panel A (speed range display) and display panel B (multi-
information).
E: Switches (see “SWITCHES (3-32)“)
This consists of the starting switch, buzzer cancel switch, front lamp switch, rear lamp switch, automatic shift down
switch, information switch, and fan rotation selector switch.
F: Lamps (see “LAMPS (3-21)“)
This consists of the warning lamp, the filter/oil replacement interval lamp, and fan operation confirmation lamp.