Komatsu Utility 76243, Operation & Maintenance Manual

Page: 118 / 302

EXPLANATION OF COMPONENTS
OPERATION
3-58
METHOD OF OPERATION 3
METHOD OF SETTING PRESET BUTTONS
To listen to a preset station, use band selector button (1) to
select AM, FM1, or FM2, then press the preset switch number
to listen to the desired station.
It is possible to preset six AM stations and 12 FM stations
(FM1: 6, FM2: 6).
1. If you are playing a cassette, press the tape eject button to
stop the tape.
2. Select the station to be preset.
Use band selector button (1) to select MW (AM), FM1, or
FM2, then use the manual tuning button to select the fre-
quency of the broadcasting station.
3. Press manual memory button (2) or seek tuning button (3).
4. Press preset button (4) of the number to be preset for 2
seconds while the frequency display is being shown on the
display. (The preset channel and frequency are displayed
and the presetting is completed).
5. Repeat Steps 2 to 4 to preset other stations.
REMARK
Use Steps 2 to 4 also when changing the setting of a preset
switch to another station.
When the power is disconnected, such as when the battery is
replaced, all the settings are deleted, so preset the stations
again.
MANUAL MEMORY BUTTON
Select the station to be preset with manual tuning button (1) or
seek tuning button (2), then keep button No.1 to button No.6 of
button (3) pressed for 2 seconds while the frequency is being
displayed to preset the station.