Koden MDC-2900, Operation Manual

Page: 75 / 191

Chapter 3 Primary operations (Menu) MDC-2900 Series
3-16 0093129012-06
CPA/TCPA
To avoid collision, it sets up LIMIT CPA (closest point of collision) and LIMIT TCPA (time to CPA).
[LIMIT CPA] and [LIMIT TCPA] can be changed directly at the upper right of the screen.
1
Move the cursor to set the value window of [CPA] at the upper right of the screen.
Press [ENT] key and change the setting value with the trackball.
Press [ENT] key to validate after changing the setup value.
2
In addition, [LIMIT TCPA] is used to specify limit by time.
TGT ID
ID can be displayed with TT (ARPA) or AIS target.
[NUMBER] and [LABEL] are used as ID.
R1
Number
Reference number
Label
5
Sarah J
Refer to “
Reference target acquisition
” (page3-26) about Reference number.
1
Press [MENU] key, and [Menu] display is shown on the screen.
Select [OS/TGT] => [TGT ID DISP], and then press [ENT] key after selecting the setup value.
MAP
2
In addition, [ID DISP SIZE] is used to specify display size.