Koden MDC-2900, Operation Manual, Page: 131 / 191

Chapter 4 General operation (Menu) MDC-2900 Series
0093129012-06 4-28
EDIT ROUTE (Alternate planned route)
· This is to map and edit ROUTE.
· Edit operation can be performed after designating block number.
· This function is valid by inputting two or more positions and each input positions are linked with line.
· Up to 50 point can be input per one block.
· Pay attention that “INSERT” will erase 50th point.
Refer to “
DISP GROUP ROUTE (Alternate planned route)
” (page4-26) for designating
display/non display.
Refer to “
EDIT COAST LINE
” (page4-27) for about EBL1/VRM1 input.
EDIT EVENT MARK
· This is to map and edit EVENT MARK.
· Edit operation can be performed after designating block number.
· Up to 50 point can be input per one block.
· Pay attention that “INSERT” will erase 50th point.
Refer to “
DISP GROUP EVENT MARK
” (page4-26) for designating display/non display.
· The own ship position and the cursor position are input with an F key.
Refer to “
F (Function key) usage
” (page2-27) for function key input.
EDIT AREA
· This is to map and edit AREA.
· Edit operation can be performed after designating block number.
· This function is valid by inputting three or more positions and each input positions are linked with line.
· Up to 50 point can be input per one block.
· Set “DIVIDE” ON at the last point to draw multiple areas in a block.
· Pay attention that “INSERT” will erase 50th point.
Refer to “
DISP GROUP AREA
” (page4-27) for designating display/non display.
It is possible to set the echo entering alarm or the echo leaving alarm within AREA.
Refer to “
MAP AREA
” (page4-6) to edit.
Refer to “
EDIT COAST LINE
” (page4-27) for about EBL1/VRM1 input.
MONITORED ROUTE
Selection values: OFF, ON
· This is to set up a function to display a route input from external device.
· Route is displayed by bold dotted line in orange color.
Refer to “
DISP GROUP ROUTE (Alternate planned
route)” (page4-26).