Koden MDC-2900, Operation Manual

Page: 122 / 191

MDC-2900 Series Chapter 4 General operation (Menu)
0093129012-06 4-19
AIS FILTER AT ANCHOR
Selection values: OFF, ON
This function is to set hidden display for sleeping targets at anchor.
AIS FILTER SPD
Selection values: 0.0 to 100.0kn
This is to set hidden display for sleeping targets that are at speed less than a set value.
AIS FILTER GZ
Selection values: OFF, ON
This function is to set display of sleeping targets when they are within the guard zone even they are
outside of [FILTER RNG].
AIS FILTER ECHO ALARM
Selection values: OFF, ON
This function is to set display of sleeping targets when they are within the Echo Alarm even they are
outside of [FILTER RNG].
OS MMSI
Selection values: 0 to 1073741824
This is for inputting of the MMSI number of AIS transmitter/receiver on own ship.
At AIS, it is possible to communicate with the specified other parties.
With inputting the MMSI number, messages to own ship can be distinguished.
It is possible to sound an alarm when a message to own ship is received.
Refer to “
AIS MESSAGE
” (page4-9)
HL BLINK
Selection values: OFF, ON
This is to set blinking of the head line.
With blinking of head line that is always displayed, the targets overlapped on the head line can be seen
easily.
TRIAL MANOEUVRE
This is the function for trial maneuver of own ship.