Koden MDC-2900, Operation Manual

Page: 31 / 191

Chapter 1 Adjustment in installation MDC-2900 Series
1-10 0093129012-06
1.10 External save of setup (Cannot use on transmitting)
To prepare for the case when the radar becomes inoperative, setup value can be stored externally and
can read out.
All values that have been changed after delivery from the plant such as menu setup, screen setup and
MAP input data, etc. will be stored.
This is also effective when replacing the radar.
The external saving shall be stored by a PC (Personal Computer) with serial communication facility
[with serial ports provided or USB (Universal Serial Bus) - serial conversion cable attached].
Dedicated software is required for PC.
Dedicated cable is required to connect the radar with PC.
Please contact with the sales agent or directly with our sales department for PC software and the
dedicated cable.
Carry on the following procedure after confirming the setup values is saved in the external PC and can
be read out.
When saving setup values externally,
1 Press [MENU] key to display “Menu”.
Select [MAINTENANCE] => [BACKUP] => [EXT SAVE] => [GO] and then press [ENT] key.
When reading out setup values from external PC,
1
Press [MENU] key to display “Menu”.
Select [MAINTENANCE] => [BACKUP] => [EXT LOAD] => [GO] and then press [ENT] key.