Koden MDC-2900, Operation Manual

Page: 105 / 191

Chapter 4 General operation (Menu) MDC-2900 Series
0093129012-06 4-2
TM RESET
Refer to “
Reset true motion
” (page2-26)
C UP RESET
· This function resets course for C UP.
DETAIL
TM RESET MODE
Selection values: OPPOSITE, COURSE, CENTER
This function is to set the reset position of true motion.
Refer to “
Reset true motion
” (page2-26)
It is convenient to use F key.
Refer to “
F (Function key) usage
” (page2-27)
HOLD
When this is switched on during transmission, the image is fixed without renewal.
It automatically returns to [STANDBY] after 30 seconds.
When the image is fixed, [HOLD] appears at the upper left side of the screen and blinks.
It is convenient to use F key.
Refer to “
F (Function key) usage
” (page2-27)
ZOOM
When this is switched on during transmission, an image expanded at the center of the cursor position
by 1 range is displayed.
During zooming, [ZOOM] appears at the upper left of the screen.
It is convenient to use F key.
Refer to “
F (Function key) usage
” (page2-27)
RANGE UNIT
Selection values: NM, km, sm, kf
This function is to set the display unit of range on this radar.
VRM1, VRM2 and the PI can be set independently.
Refer to “
VRM1 UNIT
,
VRM2 UNIT
,
PI UNIT
” (page4-22, page4-22, page4-22)