Chapter 3 How to use the menu2
CVS-1410B
3-4
0093114105-03
3.5 Maintenance
Menu
Simulation
When the [Simulation] is set to ON, the pseudo
image of echo sounder is displayed.
Slide show
The slide show of the images stored in
[Image]
→
[Image recall] is available. The time
intervals for image changeover can be selected
from 15 seconds and 30 seconds.
Caution: To perform slide show,
registration in the list of image memory
is required. When it is not registered,
slide show cannot be selected.
Initialize
It returns all the settings in the menu to the
factory settings. However, the memorized data of
display remains unchanged.
Caution: It returns to the factory settings
and the power is automatically shut
down.
System Check
It is used for diagnostic test.
(See [4.5 Dia
gnostic Test]
)
All WPTs deletes
All WPT lists can be deleted.
All stored image deletes
All stored image lists can be deleted.
Bottom start
Set up the starting depth of the seabed
detection.Onceset, the fish echo or the seabed
shallower than set up deoth will not be detected.
Past image
When the [Past image] is set to ON, the gain
control is effective for all screens including the
past image.
When the [Past image] is set to OFF, the gain
control is effective for current image only.
Inner-hull
When the installation of a transducer is
[Inner-hull], select the [Yes].
Caution: When a setting is altered, the
value of Gain (TD) will be initialized.
TD select
Choose the installed transducer (TD) in the
menu list.
Caution: When transducer is choosen by
model name, [Beam angle] value
(directivity angle) is changed
automatically depending on the
transducer.
Prev
Correct
In out
Setting
Maintain
Simulation
Initialize
System check
Inner-hull
No
OFF
All WPTs:DLT
All IMG DT:DLT
Slideshow
OFF
Bottom start
1.5
TD select
No
Return
TDM-091D
Adjust2
ON
Past image
