CVS-1410B
Chapter 1 Basic Operation
0093114105-03
1-11
key. Simultaneously, the latitude and longitude of
the point can be stored in the destination list.
Caution: Requires position data from GPS
sensor.
Selecting the event key function
Select the functions when pressing the [EVENT]
key.
1
Press the [MENU] key.
2
Select [System]
→
[EVENT Key set]. (Press
the [ ] key or [ ] key or [ ] key) (See [2.1
How to operate the menu])
3
Press the [ ] key.
4
Change the setting of [EVENT key set].
(Press the [ ] key or [ ] key)
5
Press the [MENU] to close the menu.
Presetting the waypoint
When you find the school of fish or tide, its
location can be preset as a waypoint.
(10 locations at maximum)
When presetting the waypoint, switch [System]
→
[EVENT Key set]
→
[Store pos]. (See [1.9 Use
of [EVENT] key Selecting the event key
function])
1
In the state that no other key is pressed,
press the [ ] key or [ ] key.
2
Move the cursor (red line) with the [ ] key or
[ ] key to the location to be preset as a
waypoint.
3
Press the [EVENT] key.
When decided, the red line is drawn at the
designated location on the echo sounder
menu and the latitude and longitude of
designated location are registered in the
waypoint list.
At this moment, the list number of preset
waypoint is displayed.
4
After a certain time passes, the message
disappears and presetting the waypoint is
finished.
Caution: When pressing the [EVENT] key,
if [In out]
→
[NMEA output data]
→
[TLL] is set to ON, the latitude and
longitude of location above-designated
is output to the navigation system
connected.
Caution: If the waypoint list is full, the
preset destination list is not deleted,
showing the message that the list is
fully filled.
After a certain time passes, the
message disappears.
Waypoint list # 1 is registered
Cursor
(Red line)
L
H
L
H
EVENT key set
Store pos
Store image
Fishing hot spot
Cursor (Red line)
L
H
A waypoint list is full.
Registration is not completed
