CVS-1410B
Chapter 5 Installation
0093114105-03
5-5
Flush-mount Installation
(1) Make a square hole at the location to be installed. (See Fig. 5.5.)
(2) Turn counter-clockwise the knob bolt fixing the display unit to the mounting bracket to loosen it,
push the unit to the left side and pull the unit upward. The mounting bracket and knob bolt are not
used.
(3) Remove four plastic screw covers, which are fitted on each corner of the display front face.
(4) Confirm that the unit matches with the square holes. If not matched, correct the square hole.
(5) Connect the connectors for power and transducer to the unit respectively.
(6) Install the display unit in the installing location (square hole) and fix it with four 4mm tapping
screws (or M4 pan-head). (Prepare 4mm screws suitable for thickness of installing location.)
(7) Refit the coverings removed in step (3).
Fig. 5.4 Flush-mount Instsllation
Fig. 5.5 Work of flush-mount instsllation hole
Display unit
Screw covers
Fixing holes for M4 screw (4pcs)
Unit: mm (inch)
