sequence of the relevant counter terminated by a CR/LF sequence and a Ctrl-Z marker at the
end of the file. This makes the relevant counter values accessible for evaluation using other
programs. When the COUNTER.DAT file is encountered on the diskette when the user pro-
gram is started, the counts stored in the file are automatically transferred to the corresponding
counters. Thus the counts which were valid just before the computer was switched off are
automatically set.
KODAK S-RA2500 Editing System 1.0 User Manual Page: 74
D-1.4 Auxiliary instructions
On <adr> Example: ON A-C E
The specified bit (A = bit0 to H = bit7) of the parallel interface defined in the Setup menu is set
to logical
.
OFF <adr> Example: OFF A-C
The specified bit of the parallel interface defined in the Setup menu is set to logical 0.
INVERT <adr> Example: INVERT AB
The specified bit of the parallel interface defined in the Setup menu is inverted.
D-1.5 Comments
Example: LIGHT A; PROJECTOR A LAMP SWITCHES ON
Comments which have no function other than to guide the user can be inserted in the program.
Such comment lines must only be inserted after valid instructions on a line and must be intro-
duced by the character <;> or <*>.
KODAK S-RA2500 Editing System 1.0 User Manual Page: 75
D-2 FRAME Editor key functions
D-2.1 Assignment of function keys
[F1] Help/information
[F2] Projector status poll
[F3] Delete frame
[F4] Insert frame
[F5] Start program sequence
[F6] Hold program sequence
[F7] List program
