Projector address 3 = physical address ‘c’
Projector address 4 = physical address ‘d’
In addition, you can change the location of the projector symbol on the screen so that a projec-
tor which is at the top on the left in your application is also shown at the top left hand side of
the screen.
To do this, use the cursor keys to move the luminous frame to the desired location and press
the letter key for the projector (press the SHIFT key to obtain an upper case letter) which you
wish to move to this location. The symbol representing the projector immediately moves to the
new location.
KODAK S-RA2500 Editing System 1.0 User Manual Page: 34
Pressing the ESC key takes you back to the SETUP menu and pressing ESC again takes you
back to the main menu. Your system now knows everything about the equipment you are
using and now it’s time for you to find out some more about the system.
B-1.3 One step at a time
When your program has been completed it will perform precisely what you expect it to do step
by step. First of all you must enter the individual steps as a list which represents the „timeta-
ble“ according to which your show will progress.
The FRAME Editor is a program which helps you prepare such a timetable. You get to the
Frame Editor by selecting EDITOR in the main menu and then selecting the FRAME EDITOR funct
on in the subsequent submenu. The screen display is shown on the next
a g e .
KODAK S-RA2500 Editing System 1.0 User Manual Pa
35
FILE: NONAME FRAME: 1
