15 seconds
<n> for instructions which contain repetitions:
Example:
REPEAT 3 means repeat loop 3 times
Instructions which contain name details <name>:
Example:
LABEL MYNAME (TO address, up to 8 characters)
A list of possible instructions is given below. Use the notation shown above for the arguments
enclosed in the less-than sign and the greater-than sign:
Projector instructions:
SLIDE <adrNN>: select stated slide location - apertures (slide lifter) open automatically.
SELECT <adrNN>: select stated slide location - apertures (slide lifter) remain closed.
KODAK S-RA2500 Editing System 1.0 User Manual Page: 14
OPEN <adr>: closed apertures open as soon as addressed projectors are ready.
CLOSE <adr>: apertures close and cover the slide in the slide gate.
STEP <adr>: forward step - apertures open automatically after location is reached - slide 0
follows slide 80.
BACKSTEP <adr>: backward step - aperture function same as above - slide 80 follows slide
0.
LIGHT <adr>: switch on lamp(s) regardless of aperture.
DARK <adr>: switch off lamp(s) regardless of aperture.
ALTERNATE <adr>: reverse lamp state regardless of aperture.
FLASH <adr> <n> <t>: lamps in the addressed projectors flash at a preselectable frequency
for a definable number of cycles, the final state of the lamps is the same as the initial state.
DISSOLVE <adr>: reverse lamp state, projectors which are extinguished transport next slide
into slide gate, apertures open automatically.
WIPE <adr> <t>: lamp state of a specified series of projectors is reversed with a selectable
time delay, projectors which are extinguished transport the next slide into the slide gates,
apertures open automatically, the sequence of the projectors is the same as the sequence of the
