36
. Place WALL PANELS RIGHT and LEFT into BRACKETS A (see FIGURE 14-9).
37
. Push the WALL PANELS up to the TOP PANEL.
38
. Hold the WALL PANELS in that position until the next step is finished.
39
. Drill 3 holes for the screws into each WALL PANEL. These also mark the position
of the ANCHORS in the wall.
40
. Remove the WALL PANELS.
41
. Make holes for the ANCHORS at the marked positions.
42
. Insert the ANCHORS into the holes.
43
. Apply SILICONE along the wall opening.
44
. Place WALL PANELS RIGHT and LEFT into BRACKETS A.
45
. Push them up to the TOP PANEL.
BRACKET B
3 SCREWS
WALL PANEL
3 SCREWS
WALL PANEL
BRACKET C
BRACKET C
SILICONE
SILICONE
TOPPANEL
figure 14-9
II 3066-2
KODAK AG, Stuttgart
14-11
10/98
Summary of Contents for MULTILOADER 700 PLUS
