4
.
Insert the PLASTIC BEARING into the BRACKET. Use the left-hand hole.
5
.
Feed the MAIN SWITCH EXTENSION from underneath through the PLASTIC
BEARING.
6
.
Screw the KNOB onto the MAIN SWITCH EXTENSION.
7
.
Slide the ACTUATOR on the short arm of the MAIN SWITCH EXTENSION.
8
.
Secure the ACTUATOR with 1 C-RING at the indicated C-RING POSITION, that it
cannot slide off.
9
.
Engage the ACTUATOR with the horizontal part of the PROCESSOR MAIN SWITCH.
10.
Gently pull up the KNOB to test if the MAIN SWITCH is actuated.
11.
Gently press down the KNOB to switch off the PROCESSOR MAIN SWITCH.
II 3066-2
KODAK AG, Stuttgart
7-11
10/98
Summary of Contents for MULTILOADER 700 PLUS
